High-quality 2-way built-in loudspeaker for ceiling installation.
TECHNICAL DATA
Design:
Round, 2-way
Dimensions:
240 mm
Cutout:
205 mm
Installation depth:
68 mm
Weight:
1080g/pc
Sub-/mid-range driver:
6 ½" (16.5 cm)
Tweeter:
13 mm Dome
Membrane material:
PP (Polypropylene)
Output:
50 watts max.
Impedance:
8 Ohm
Sensitivity:
86 dB (1 watt/1m)
Frequency range:
72 Hz–20 kHz
Locking:
Hooks with screws accessible from the front
Conforms to CE:
yes
Conforms to RoHS:
yes
operation temperature range = -25 to +70°C
operation humidity range = 0 to 95 % (no condensation)
HANDLING AND INSTALLATION INSTRUCTIONS
Generally, when installing built-in loudspeakers ensure that no loose screws or other parts can vibrate in the ceiling
or wall construction and cause interference. For use only in dry rooms. If necessary the sealing tape can compensate
irregularities of the wall surfaces.
1) Lock, screwed on from the front
2) Ceiling panelling e.g. grid plate or gypsum plasterboard
1
2
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, in-akustik GmbH & Co. KG declares that the equipment typ is in compliance with Directive 2011/65/EU. The full text of the EU declaration of conformity is available at the following
internet address: www.in-akustik.com
Indication without guarantee. All product images similar. We reserve the right to make changes.