Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. DESCRIPTION
The KNX
®
programming adapter (360-39001) is used in combination with the Niko dimmer switch, KNX
The state of the programming adapter is indicated by a red LED.
2. DIMENSIONS
71.2 mm
58.1 mm
30.4 mm
3. INSTALLATION
42.1 mm
Mount the programming adapter (360-39001) on the Niko KNX
"OBEN / TOP" indication on the programming adapter faces the "OBEN" and "TOP" indications on the upper left/ right corners of Niko KNX
The red LED will flash when the communication objects and corresponding parameters are uploaded to the KNX
42.1 mm
a
30.4 mm
360-31001
b
72-505
72-515
72-506
72-516
4. DISMANTLING
1.
Detach the KNX
programming adapter from the dimmer switch.
®
The red LED on the programming adapter turns off and the Niko KNX
2.
Store the programming adapter away for future use.
• Ensure that the adapter's pins are not short-circuited or the batteries will be discharged.
• Keep the contact pins clear of contaminants as this could cause the adapter to fail during the configuration process.
• Remove batteries before long-term storage.
3.
4.
PM360-39001_EN
58.1 mm
®
(360-31001). It temporarily provides power to the KNX
30.4 mm
30.4 mm
42.1 mm
42.1 mm
42.1 mm
42.1 mm
24.4 mm
dimmer switch (360-31001) with the central plate removed. This will activate the configuration mode of the KNX
®
30.4 mm
30.4 mm
®
OBEN / TOP
dimmer switch will revert to the normal mode.
®
71.2 mm
71.2 mm
58.1 mm
24.4 mm
24.4 mm
®
dimmer switch (360-31001). The red LED on the programming adapter will now light up.
dimmer switch via the ETS software.
* Batteries not included
c
30.4 mm
360-39001
®
dimmer switch and activates the configuration mode.
42.1 mm
42.1 mm
30.4 mm
dimmer switch. Ensure that the
®
2
3
EN
Werbung
