Installing The Device - Berbel AutoRun 2.0 Montageanleitung

Installation
3.3

Installing the device

300
1 Install the device between the hob
and floor. When doing so, observe the
installation requirements.
, "3.1 Safety instructions for
installation" (page 45).
1 Ensure that the mains and electrical
connecting cables are not kinked,
crushed or damaged.
1 Ensure that the hob is not in use.
If necessary, additionally fasten the
device using suitable screws.
46
1 Fasten the electronics box to the hob
supply line with cable ties.
1 Connect the wall power supply with
the electronics box.
1 Plug the mains plug into the socket.
6005300_c – 26.09.2023