Auto-Update - Human One Benutzerhandbuch

The time and date can be updated manually or automatically. Withauto-update, the time and date are automati-
cally synchronised with external clocks. Auto-update is generally more accurate.

AUTO-UPDATE

Auto-update works with data sent over DAB, FM or the Internet. The clock is only updated when in a correspon-
ding mode, so it is best to select a mode you use regularly. DAB and FM use time signals broadcast with radio
transmissions. Network uses a time signal sent from the Frontier Silicon Internet radio portal when in network-
connected mode.
• Select Update from DAB, Update from FM, Update from Network or No update.
• If you are updating from the network, set your time zone.
• If your country uses daylight saving, the automatically updated timefrom the
network may be wrong by one hour. When daylight savingsare in effect (during
the winter), turn on the Daylight savings option to rectify this. Note that if you are
updating the time from DAB or FM, the Daylight savings option has no effect on
the clock's time. The radio will auto-update from the selected source when time
information is available.
MANUAL SET
If you set No update, the wizard now prompts you to set the time and date manu-
ally. The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM with the
first value, dd, active (flashing). Adjust each value with the Select control. As each
value is set, the next value becomes active and flashes.
55