Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
EN
FireWare Smoky Multi Socket
4
Technical information:
Voltage junction box:
Power junction box:
Protective class junction box:
Voltage smoke unit:
4.
Use
1.
Use syringe to fi ll up the FireWare Smoky Multi Socket with the special smoke liquid.
a. Remove the protective cap from the syringe.
b. Fill in the syringe max. 0,8 ml of the FireWare special smoke liquid or FireWare
Cirrus Smoke Fluid. Other smoke fl uids are not permitted!
c. Fill the heating element (c) with smoke liquid.
Apply the liquid around the metal needle (d),
keeping the top of the needle clear!
Attention! Please do not fi ll up the heating element to the top.
Otherwise no smoke will be produced!
d. If any smoke liquid is left in the syringe, return it to the bottle.
2.
Connect FireWare Smoky Multi Socket to 230 V DC power supply.
ONLY use the appliance in plugs with an earth connection !
3.
Press button
4.
FireWare Smoky Multi Socket needs ~ 3-5 sec to heat up. It will start to produce smoke
and crackling sound.
5.
To stop the smoke fl ow, please press again button
device from the power supply.
6.
After use, unplug the FireWare Smoky Multi Socket and store as described in Paragraph 2.
www.FireWare.nl
a
3
2
230 Vac
500 Watt
IP 20
16 V
on the remote control to start smoke fl ow.
b
c
d
1
on the remote control or unplug the
FireWare Smoky Multi Socket
Remote
5
Remote
15
Werbung
