Werbung
9.2
Zertifikat PROFIBUS
Certificate
PROFIBUS Nutzerorganisation e.V. grants to
optek-Danulat GmbH
Emscherbruchallee 2, 45356 Essen, Germany
the Certificate No: Z01398 for the PROFIBUS Device:
Model Name:
Revision:
GSD:
This certificate confirms that the product has successfully passed the certification tests
with the following scope:
DP-V0
DP-V1
Profile
Physical Layer
Test Report Number:
Authorized Test Laboratory:
The tests were executed in accordance with the following documents:
"Test Specifications for PROFIBUS DP Slaves, Version 3.0 from November 2005" and
"Test Specifications for PROFIBUS PA Devices, Profile 3.01, Version 4.9.0 from February 2007".
This certificate is granted according to the document:
"Framework for testing and certification of PROFIBUS and PROFINET products".
For all products that are placed in circulation by March 04, 2024 the certificate is valid for life.
Karlsruhe, July 05, 2021
_____________________________
(Official in Charge)
Abb. 27
Zertifikat PROFIBUS
optek-Manual--1004-1010-01--ProfibusPA-DE-2022-12-08
®
PA
C4000 / Haze Control (C/HC_4xxx)
1.00; SW/FW: 2.20.C.20; HW: 1.02
4000BF3.gsd, File Version: 1.04
PA139703.gsd
MS0, Fail_Safe, Set_Slave_Add
MS2, I&M
PA Devices V 3.01
MBP
itm 671 PA 01/01
itm, München, Germany
®
PA
- 55 -
www.optek.com
Board of PROFIBUS Nutzerorganisation e. V.
_____________________________
(Karsten Schneider)
_____________________________
(Dr. Jörg Hähniche)
Anhang
Werbung
