Sharp XL-B514 Bedienungsanleitung Seite 7

10. Headphone jack
11. Rotary Volume/Scroll/Select control:
• Rotate: Adjust the volume
• Rotate in the menu or presets: Scroll through the available menu
options or preset locations
• Short press: Select a displayed radio station/frequency, menu or
preset option
• When alarm is sounding in standby, short press: activates
10-minute snooze.
12. USB input
13. Aerial input
14. Aux in
15. RCA phono speaker outputs
16. Power input
Remote control
(Refer to 2 on page 2).
1.
Press to power on or enter standby.
2.
Press to mute the sound. Press again to resume sound, or press
+/- to resume sound.
3.
Presets (20 FM)
In FM mode:
• Short press: Preset recall.
• Long press: Preset store.
4.
Menu: Press to enter the menu options.
5.
Info: Press to cycle through different types of information available.
6. Press to enter FM mode.
7. Short press to enter Bluetooth mode. Long press to disconnect
from paired device.
8. Press to change audio source to CD.
9.
Press to change audio source to AUX. Press again to change audio
source to USB.
10.
Equaliser: Press to cycle through EQ options.
11.
Loudness compensation increases the low and high
frequencies when listening at low volume.
12.
Press to cycle through display brightness settings: high, medium
and low.
13. In CD/USB mode: press to stop playback. Press again to open/
close CD drawer.
14.
- In FM mode: Move down the frquency band by 0.05 MHz.
- In Menu: Move up the menu options.
15. Select/Play/Pause. When alarm sounds, press to snooze.
In Bluetooth mode: Long press to disconnect current device and
scan for new devices.
16. Short press for next track/station, long press for fast forward/
search forward.
17. Short press for previous track/station, long press to rewind/
search back.
18.
- In Menu: Move down the menu options.
- In FM mode: Move up the frequency band by 0.05 MHz.
19.
Repeat: In CD/USB mode: Cycle through repeat options: repeat
current track, repeat all tracks, repeat off.
20.
Shuffle: In CD/USB mode: Shuffle songs on/off.
21.
In CD mode: Press to program the playback order.
22. In CD mode: Press once to play the first 10 seconds of every
track on a CD. Press again for the current track to play in full.
23. Bass +/-: Press to adjust the bass.
24. Volume +/-: Press to adjust the volume.
25. Treble +/-: Press to adjust the treble.
26. Numeric keypad (0-9): Used for song/preset selection, or to enter a
frequency.
27. Alarm: Press to set up Alarm 1/2.
When in standby, press to switch on/off alarms.
28. Sleep timer: Press to cycle through sleep timer options.
Fitting or replacing the remote control
batteries
1. To open the battery compartment, push your thumb down on to
the circle on the battery compartment cover and slide it down.
2. Fit two AAA batteries observing polarity +/- as shown. When
replacing the batteries, use only the same type of battery supplied.
3. Re-fit the battery cover and clip it in place.
Using your FM Hi-Fi micro system
Connection
NOTE: Your micro system has been supplied with a power adapter. Please
check and ensure that you connect the correct 3 pin or 2 pin part to the
power adapter that is appropriate for the country where the product will
be used.
Connect the aerial to the back of the micro system to receive the best
possible radio reception and signal quality.
Connect the right and left speaker cables to the RCA sockets on the back
of the main unit.
Connect the power adapter lead to the power input on the back of
the micro system and plug the power adapter into the wall socket
and switch on. The micro system will power on and display <SHARP
sharpconsumer.eu> and then prompt to select the language you would
like the menus to appear in. Use
options are: English, Francais, German, Italian, Spanish, Polish and Dutch.
When you have chosen the language, the micro system will go into
standby.
The display will read <Time is not set>. When you turn the micro system
on, you will be able to set the time and date.
NOTE: The processes described here use the controls on the main unit (unless
specified). For controls using the remote control, please refer to the 'Remote
control' section.
Initial set-up
Extend the aerial to ensure the maximum signal strength when you scan
for radio stations.
Short press to switch on your micro system.
Long press or button to scan up or down the frequency band.
The radio will search for and stop at the next available station.
Short press or to fine-tune each frequency in 0.05MHz steps.
Time and date
To set the time and date, turn on the radio. Long press
menu options.
to select <System> / <Time> / <Set Time/Date>. <Set
Use
time> is displayed and the hour digits will flash; use
hours and minutes. <Set date> is displayed and the day will flash; use
to set day, month and year. <Time Saved> is shown once the
EN
to choose a language. The
to enter the
to set