cherubini DOMOTIC TX Bedienungsanleitung Seite 13

To delete the transmitter from the motor, an already programmed remote control must be
used. The deleting sequence is the following:
Tn: Already programmed remote control
+
A B
Tn
- You can use an existing wall socket to command a motor, without having to add extra
wires to the wiring.
- Thanks to its small size (40x40x20), you can insert the Domotic TX in a built-in socket.
- You can use switches of existing kind, so as not to change the look of the living space.
DELETING DOMOTIC TRANSMITTER
A
DOMOTIC TX INSTALLATION EXAMPLE
Tn
13
SET
(2 sec)