Werbung
ENGLISH
FIRST TIME USE & CONNECTION MODES
Wireless mode: Connect the USB receiver to your PC or to the
USB port on the charging base. Move the switch under the mouse
to the BT position.
Wired mode: connect the mouse to your PC via the USB cable.
BT mode: 1) Move the switch under the mouse (8) to the BT
position. 2) Turn on the Bluetooth on your device, then search
and select "KLIM Blaze X PRO" from the list of available BT
devices. *In BT mode, if you can't find the mouse on the list, press
the BT pairing button (7) for 5 seconds, then try to pair the KLIM
Blaze X again.
Charging the battery
With the supplied USB cable: charging speed will depend on
power output of the port you connect it to. For quicker charges,
we recommed using a dedicated fast charger.
With the charging station: place the charging station on your
desktop and connect it to your computer via the supplied USB
cable. Place the mouse on top of the charging station until the
two pieces snap together in order to charge the mouse.
Note: You may use the USB port to connect a phone for charging.
Regardless of the charging method, the RGB lights on the mouse
indicate the battery status:
- When battery power is lower than 20%, the RGB lights flash red;
- When charging, the RGB lights turn green;
- When battery power exceeds 90%, the RGB light will change
back to the selected RGB effects.
DPI Indicator & advanced customization
2.4G/Wired modes: 400 (red) / 800 (blue) / 1600 (green) / 3200
(yellow) / 6400 (purple)
BT mode: 800 (red) / 1200 (blue) / 1600 (green)
Note: You can adjust the DPI up to 12000 by using our driver.
Note: In BT mode, all the RGB effects are disabled.
To access advanced customization options such as mouse key
remapping, macros and multiple RGB effects and colors, download
our dedicated drivers at www.klimtechs.com/drivers
5
Werbung
