Thermrup HI616 Gebrauchsanweisung Seite 10

4. Operating
• To fit your individual shoe size to the insole, please cut carefully
along the cutting lines of the electric heated insole. The cut line
on the insole indicates exactly the appropriate size.
• The tip of the heated insole can be cut
without negatively affecting the heating
function of the insole.
• Please, insert four AA-batteries each into the
supplied battery case.
*** The heating time depends on the battery selection!
For better heating performance we recommend using rechargeable
AA batteries. ***
• Carefully place the insole inside the
boot or shoes. Next, connect the plug
of the cable to the socket of the
battery. Fasten the gaiter along the leg
and place the battery-box in the
battery-box holder. You can tie the
cable with the Velcro.
• Press the power button for approx. 2 seconds to switch on the
battery box. Next press the power button briefly (if necessary,
several times) to set the desired temperature level (1 to 2). At a
higher level the LED lights up red, at low level the LED is green
• After use, press the power button for approx. 2 seconds to switch
off the battery box.
LED
Kabel-Buchse
Power-Taste
10