Dmx-Protocol; Cleaning And Maintenance; Technical Specifications - EuroLite MD-2030 Bedienungsanleitung

DMX-Protocol

Rotation direction and speed
Channel: Value:
000 - 000
001 - 127
1
128 - 128
129 - 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Max. load WLL (4-fold):
Max. load BGV C1 (8-fold):
Max. load BGV C1 (10-fold):
Max. load BGV C1 (12-fold):
Max. diameter of mirror ball:
Rotation-speed:
Dimensions (LxWxH):
Weight:
Please note: All information is subject to change without prior notice. 27.08.2014 ©
Function:
No rotation
Decreasing clockwise rotation
No rotation
Increasing counter-clockwise rotation
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
13 W
30 kg
15 kg
12 kg
10 kg
50 cm (EUROLITE)
up to 5 RPM
230 x 222 x 140 mm
3 kg
19/19 00085409.DOC, Version 1.0