Inakustik AC-2502 Bedienungsanleitung Seite 4

OPERATION MANUAL OPERATION MANUAL
AC-2502 PREMIUM USB CAR POWER ADAPTER QC 5/9/12V
ITEM-NO.: 0072670YY | 0072671YY | 0072672YY | 0072673YY
The Referenz AC-2502 power cable is equipped for this demanding task and is designed to connect high-quality hi-fi and high-end audio systems. As well as having 3.3 times the prescribed minimum
conductor cross-section, it is also equipped with shielding to protect the sensitive audio components in the system from the interference fields caused by the current peaks.
But for all the importance of high-quality sound, safety plays a particular role with this category of cable. That's why every AC-2502 undergoes an insulation and high voltage test in addition to the standard
function test. The results are recorded and each cable is given a unique serial number.
Hand-made in Germany
Like all loudspeaker and audio cables in the Referenz series, every AC-2502 is manufactured in Germany and tested to ensure it functions perfectly.
FEATURES
• High-purity copper conductors
• 3 x 2.5mm² cross-section
• Protective conductor (protection class 1)
• Electrostatically shielded
• Unit-tested (function, insulation, high-voltage)
• CE compliant
• With certificate
• Made in Germany
Technical Data
• Temperature range: 0 – 40°C
• SCHUKO -> C13/C15: 10 A 250 V AC
• SCHUKO -> C19: 16 A 250 V AC
OPERATION
If your system consists of several components, we recommend measuring the phases of the sockets to which you connect your hi-fi devices. The aim is to attain a potential difference between the signal
masses of the devices that is as low as possible and thereby low compensating currents via the signal cable.
To measure the phases, the devices are initially only connected to the mains power supply and switched on without being connected to each other. Then the potential between the signal masses (e.g. earth
contact on the cinch sockets) is measured. After turning the mains plug round and repeating the measurement, you can determine in which position the potential is lowest. Observe the operating instructions
of the devices in this regard and ask your specialist retailer.
NOTE: Before you connect the devices with each other, it is vital that they are switched off and disconnected from the mains power supply.
Now connect the devices with each other. Please note the operating instructions of the devices. Plug the mains power cable first into the device and then into the socket. If you are using a socket strip, insert
the plug of the socket strip into the power supply socket last.
NOTES
Simplified EU Declaration of Conformity
Hereby, in-akustik GmbH & Co. KG declares that the equipment typ is in compliance with Directive LVD 2014/35/EU and RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.in-akustik.com
Important remark:
• Please also refer to further remark about this product on our homepage www.in-akustik.com.
• This product is NOT intended for the United States of America or territories that belong to the USA and must NOT be operated in these countries.
Misc
Indication without guarantee. All product images similar. We reserve the right to make changes.
in-akustik GmbH & Co. KG Tel.: +49 (0) 7634 5610-70
Untematten 12-14 Fax.: +49 (0) 7634 5610-80
79282 Ballrechten-Dottingen E-Mail: info@in-akustik.com
GERMANY Web: www.in-akustik.com
AC-2502 | C19
Scope of delivery
• 1 x mains connection cable
• 1 x operating instructions
• 1 x warning card (do not bend, do not subject to load, indoor use
only, solely for connecting stationary hi-fi and high-end entertainment
electronics devices)
AC-2502 | C13 AC-2502 | SCHUKO
MA DE IN r
G E R MAN Y