Werbung
EN
STEP 2 -
Backrest Assembly
1. Align the brackets of backrest at the clips of seat-back.
2. Push firmly the brackets into the seat-back. Listen for a "click" on each side to ensure
the backrest is locked in properly.
B
14
ATTENTION
Be careful not to crush or pinch the wires
when installing the backrest.
STEP 3 -
Cable Connec�on
Connect the armchair according to the cable diagram below.
1.Connect the cables #1, #2, #3 of the same color from the backrest and the seat together.
2. Plug the USB cable #5 from the armrest into the seat.
3. Plug the power supply cable #C into the seat.
4. Plug the cable of the remote control #D into the seat.
5. Connect the cable #4 from the backrest to the remote control #E.
3 3
4
E
C
1 1
2 2
5
D
EN
15
Werbung
