Red Sea REEFER
G2+ Series
™ ™
3 Assembly
The following information complements the graphic manuals.
WARNING: If you are not experienced in the construction of self-
assembly furniture or the installation of aquarium systems,
seek suitably qualified assistance.
ATTENTION: The top board of the cabinet (Part C) and some other parts
of the cabinet (in certain models) are packed under the
aquarium. In order to retrieve these parts, remove the
aquarium from its packaging. Make sure to avoid contact
between the Bulkheads on the bottom of the tank and the
floor, by placing the glass aquarium on Styrofoam parts that
are used in the package.
The REEFER
™
includes the following main components:
• Glass aquarium
• Cabinet (self-assembly)
• ReefMat Ready glass sump with optional Refugium chamber
• Internal Piping kit with outlet nozzle
• ReefATO+ system
• Glass Extension Sump (REEFER 900 G2+ and REEFER-S 850 G2+ / 1000 G2+ /
PS-950 G2+ models only)
Detailed instructions for the complete assembly of the REEFER
found in the accompanying graphic manuals.
Complete the assembly of the cabinet including the doors as shown in the
graphic assembly manual and place in the final operating position (see
location above).
NOTE: It is important to assemble the REEFER
6
™
can be
™
in the order indicated.
WARNING: Read before lifting the glass aquarium onto the cabinet.
The top of the cabinet is approximately 86cm/34" ( 100cm/40" for
Peninsula ) from the floor.
The table shows the approximate weights of the different models of the
REEFER
™
aquarium glass.
Approximate total weight of Aquarium Glass
Model
170 G2+
200 G2+
Weight
35Kg/
40kg/
77lb
88lb
Model
425 G2+
525 G2+
Weight
95kg/
125kg/
210lb
275lb
Model
P-350 G2+
P-500 G2+
Weight
101 kg/
121 kg/
223lb
267lb
Model
S-850 G2+
S-1000 G2+
Weight
226Kg/
258Kg/
500lb
570lb
250 G2+
300 G2+
350 G2+
55Kg/
58kg/
64kg/
122lb
128lb
140lb
625 G2+
750 G2+
900 G2+
155kg/
195kg/
225kg/
340lb
430lb
500lb
PS-700 G2+
PS-950 G2+
206 kg/
251 kg/
454lb
553lb