Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION OF THE APPLIANCE IN THE COLUMN
Insert the appliance into the column, placing it on
the opposite site of the hinges, and make sure 3-5
mm distance gap.
1
Screw the appliance lower part.
3
Use a cross-screwdriver to loosen the connecting
pin underneath the right middle hinge, and adjust
to screw onto the right cabinet wall.
5
After ensuring the match between appliance door
and column door, then screw the appliance upper
part to the cabinet
2
Fit the seal to the appliance, cut off the
excessive part if necessary. Fit the bottom
parts with plastic covers.
4
EN 18
Werbung
