Package Contents - Contacta Il-Rx30 Bedienungsanleitung

Using the RX30 Hearing Loop Listener
Place the headset over both ears and adjust the side arms until
you have a comfortable fit. Ensure the headset is plugged into the
RX30 Hearing Loop Listener via the 3.5mm audio jack.
The control wheel can be used to switch the device on and also
to control the volume. The red LED will light up when the device
is switched on.
Hold the RX30 in a vertical position, adjust holding height to find
the optimum sound level and quality (this can vary depending on
the installed hearing loop location), this can be achieved using eit-
her the lanyard or belt clip provided with this kit. Changing the
angle of the device could reduce the sound level and its quality.
Make sure that the hearing loop system and the sound source
connected to it are switched on.
Adjust the volume of the RX30 Hearing Loop Listener to a com-
fortable level. The bass cut switch can be used to optimise sound.

Package contents

Please check if all following components are included:
- RX30 Hearing Loop Listener
- Lanyard
- Belt clip
If any parts are missing, please contact your dealer or venue.
English 4
- 2x Rechargeable batteries
- User manual
- Headset (included in IL-RX30
kit only)