Werbung
LED-CONTROL
Operating Instructions
(A) Switch on illuminant D50 according to ISO 3664:2009
(B) Switch on illuminant D65 according to ISO 3668
(C) Continuously dimming of illuminants
COMMISSIONING
1. Turn on the luminaire by pressing the black main power
button.
2. Choose illuminant (A or B) and confirm with (E). The
diode above the switch of the active illuminant is shining
green.
3. If required, you can dimm the luminaire (C) or switch off
UV content of illuminant D50 / D65 (D). A red diode is
shining if UV content is switched off.
4. Turn off the light when you finished the color assessment
(E). After that you can switch off the luminaire completly
by pressing the black main power button.
DE | JUST Normlicht GmbH | Vertrieb + Produktion | Tobelwasenweg 24 | 73235 Weilheim / Teck | Telefon: +49 (0) 7023 9504-0 | Fax: +49 (0) 7023 9504-52
US | JUST Normlicht Inc. | 2000 Cabot Blvd. West, Suite 120 | Langhorne, PA 19047-2408 | Telefon: +1 267 852 2200 | Fax: +1 267 852 2207
FR | JUST Normlicht France SARL | 3 Rue Louis Pasteur | 67240 Bischwiller | Telefon: +33 (0)3880628-22 | Fax: +33 (0)3880628-23
A
B
C
D
(D) Switch off UV content
(E) On / Off button for standby mode
NOTES
ƒ
If you switch on the luminaire again, the last set values
will be stored
ƒ
You should shut down the luminaire by pressing the
On / Off button (E) before you switch off the main power.
ƒ
You can change continuously illuminants (A, B and UV)
without pressing (E).
E
Werbung
