Berner 206958 Bedienungsanleitung Seite 3

Technical Data: Technical Data:
Lamp: Lamp:
Battery: Lithium-Ion 3.7V DC, 1200mA Battery: Lithium-Ion 3.7V DC, 1200mA
Running time: approx. 2 hours Running time: approx. 2 hours
Brightness: approx. 300 Lux @ 0,5 Meter, 300lumen Brightness: approx. 300 Lux @ 0,5 Meter, 300lumen
IP rating: IP20 IP rating: IP20
Main features: Main features:
A. Special design optical lens offering 90-degree fl ood light A. Special design optical lens offering 90-degree fl ood light
B. 340 degree bendable B. 340 degree bendable
C. Strong magnet on bottom, clip for pocket size, place it anywhere C. Strong magnet on bottom, clip for pocket size, place it anywhere
D. USB charging system, convenient charging with computer or other digital devices D. USB charging system, convenient charging with computer or other digital devices
Instructions for use: Instructions for use:
1. Connect the charger to main electricity. The indicator on lamp will show red if the connect to main electricity 1. Connect the charger to main electricity. The indicator on lamp will show red if the connect to main electricity
is right. is right.
2. Switch off the lamp before connecting to the charger. 2. Switch off the lamp before connecting to the charger.
3. The indicator on lamp will turn red indicating charging begins. 3. The indicator on lamp will turn red indicating charging begins.
4. The indicator on lamp will turn green indicating charging completed. 4. The indicator on lamp will turn green indicating charging completed.
Caution: Caution:
1. Fully recharge the lamp until indicator turn into green recommend to wait 30 mins before fi rst use 1. Fully recharge the lamp until indicator turn into green recommend to wait 30 mins before fi rst use
2. Avoid looking directly into the beam. 2. Avoid looking directly into the beam.
3. Switch off the lamp when not in use 3. Switch off the lamp when not in use
4. If lamp will be stored for one month or more, please fully charge it prior to storage. 4. If lamp will be stored for one month or more, please fully charge it prior to storage.
5. Do not use the lamp near open fl ames 5. Do not use the lamp near open fl ames
6. CAUTION: MAX INPUT 5V DC / 1A !!! 6. CAUTION: MAX INPUT 5V DC / 1A !!!
Recommend charger: Recommend charger:
Connector: micro USB connector Connector: micro USB connector
Voltage: 5V DC Voltage: 5V DC
Current: MIN: 300mA, MAX: 1A Current: MIN: 300mA, MAX: 1A
Power Connection: Power Connection:
Verify that the voltage of the battery charger corresponds to that of the system. Use the lamp within places Verify that the voltage of the battery charger corresponds to that of the system. Use the lamp within places
prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fi t's on the cable is suitable for the work environment, if it is not, it must be replaced. fi t's on the cable is suitable for the work environment, if it is not, it must be replaced.
Advice for cleaning and care: Advice for cleaning and care:
The surface of the Berner lamps is made of high grade synthetic material. Please don't use corrosive or The surface of the Berner lamps is made of high grade synthetic material. Please don't use corrosive or
aggressive cleaner, these may damage the surface. aggressive cleaner, these may damage the surface.
(EN)