Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Click Install.
EN
8. Click Finish.
3
Pairing
1. Click with right button to the bluetooth icon in the notification area and select Show
Bluetooth Devices.
2. Click Add Device and select, for example, Audio/Video device.
3. Make sure that the device is visible during the searching. Select the found out device
from the list and click Next.
4. After finishing the pairing click Finish.
During the pairing you may be prompted to enter the pairing code. You must enter the
identical code to both devices. If you pair the earphones that do not enable to enter
a code, please, try to use the combination of 0000 or 1234, or have a look at the manual
of the paired device.
4
Additional information
In setting the Bluetooth (the item in the menu after clicking with right button to the
bluetooth icon in the notification area) you can set the incorporated services, file sharing,
COM ports, PIM and others.
5
Problem solving
Installation was carried out smoothly but the dongle is not detected by
computer.
Make sure that the USB port used for the dongle is functioning via connecting e.g.
a keyboard or a mouse. If you have installed a different driver or software for bluetooth,
the driver or software must be uninstalled.
The dongle is functioning but in searching no device is displayed.
Make sure that the searched device is within the range - 100 m in the open space without
obstacles or 10 m in the building. Make sure that the device is switched on and ready and
in the searching mode.
EN
Werbung
