Giesemann MATRIXX Bedienungsanleitung Seite 23

MATRIXX
If desired, choose the weather settings here. The following options are available:
Cloud Simulation
Yes/No (On/Off)
Cloud Duration
Clouds per Day
Blackout
Test
Click the <OK> button to save all settings, or click the <CANCEL> button, to reject the settings.
The Moon/Lunar Phase Menu
This section allows setting of the moonlight simulation. The inner pair of T-5 lamps are always the
lamps for the moonlight.
The window is showing a graph with intensity shown on the vertical axis and duration shown on the
horizontal axis over a period of 0-28 days: Move the slider entitled "Moon Intensity", to adjust the
maximum brightness of the moon. This value determines the maximum intensity of the full moon at
day 14. All other values of the ascending and descending lunar phase intensity will be calculated
automatically across the 28 day cycle. Move the slider entitled "Lunar Cycle" to determine the current
moon phase position relative to your own real time lunar cycle. Ie if your local Luna phase is at its
peak in 2 days time, set the slider to day 12. After confirming the settings, a dialog appears. Here you
can set the daily moonrise and moonset times. Finally, save your preference by clicking the <Save> or
<Transfer Settings> button.
This setting simulates the passing of clouds by consecutive dimming and then
brightening of your light to simulate the passing of clouds.
Here the duration of each cloud can be adjusted.
Here the number of clouds are determined each day from 1-100. The individ-
ual clouds occur at random intervals.
Here the desired cloud density can be adjusted which affects the amount of
dimming encountered per board as a cloud passes with 0% representing very
dense cloud cover 100% representing very light cloud cover.
Here the simulation is triggered.
23