Westfalia Tornado Originalanleitung Seite 3

Assembling
1. Assemble the mop handles together. Turn them clockwise in order to
tighten.
2. Place the mop on the floor and attach the mop holder onto the mop.
Press down the mop holder with the foot until the mop holder locks
audibly.
3. To remove the mop, step with your feet on the fibres – do not step on
the mop holder – and pull out the mop holder from the mop.
Using
1. Fill the bucket up to the MAX marking with
water. Make sure the wringer is not
immersed in the water. Add cleaner.
2. Immerse the mop into the bucket until it is
completely soaked.
3. Place the mop in the wringer and make sure
all fibres are in the wringer.
4. Do unlock the rotating mechanism, loosen
the unlocking lever by lifting up.
5. Now push down the handle. Due to the fast
turning the water will be wrung out. Repeat
the procedure several times depending on
the wetness that you require for cleaning the
floor.
6. Now lock the unlocking lever in place in order
to fix the handle and to clear the floor.
Cleaning

After use rinse the bucket thoroughly with water to clean it.

The fibres can be cleaned at a temperature of up to 40° C. Do not use
any fabric softeners.

Store the cleaning bucket and the mop indoors in a dry place that is
protected from dust, dirt and extreme temperatures.
Instruction Manual
3