Westfalia 92 80 44 Bedienungsanleitung Seite 6

Operation
1. Extend the road cone completely up
from its housing.
2. Turn the battery compartment counter
clockwise and remove the lamp head
from the warning light. Insert two batter-
ies of the type 1.5 V LR03 (AAA), ob-
serving right polarity. You will find the
polarity symbols on top of the battery
compartment.
3. To lock the bayonet lock, first insert the
pins of the battery compartment into the
lamp head and turn the battery com-
partment clockwise to engage.
5. Press the warning light up to the end
into the opening of the road cone in or-
der to press down the button of the lamp
head. By doing this, the LED warning light will start flashing con-
tinuously.
To change the flashing mode of the LED warning light or set tie
to continuous light, pull the light from the cone and press the
button again.
Cleaning and Storing
 To clean the road cone, wipe the body with a moistened cloth.
Do not use aggressive chemicals.
 If the road cone becomes wet, first allow to dry completely. Fold
down the cone and store it in the boot.
Technical Data
Power Supply of the Warning Lamp: 2 x 1.5 V LR03 (AAA)
Dimensions: 45 x 24 x 24 cm
Weight: 630 g
Operation
VI