Quax TRENDY 54 05 18 Serie Handbuch Seite 23

TRENDY
54 05 18xx
4. Assembling the night table
Step 1 : Use both legs 5, both cross bars 6, four eccentrics E, four connectors D, two brackets F and two
wood screws G
Tighten two connectors (D) in the provided holes on the inside of the legs (5). Push two eccentrics (E) in
the provided drillings on the inside of the cross bars (6). Place the brackets (F) in front of the holes on the
inside of the cross bars. Fix the profi les into the frame with a wood screw (G). Push the cross bars (6) with
their wooden dowels into the holes and over the connectors of a leg (5). Tighten the eccentrics. Push the
other leg with its connectors in the drillings and over the wooden dowels of the cross bars. Tighten the
eccentrics.
Step 2 : Use the top 1, the bottom and the fi xed shelf 3, the sides 2L and 2R, the back 4, sixteen wooden
dowels A and twelve connectors B
Tighten four connectors (B) into the holes underneath the top (1). Tighten four connectors (B) into the
holes on the inside of the sides (2L and 2R). Push two wooden dowels (A) in the holes provided on top of
the sides. Push four wooden dowels (A) in the holes provided at the ends of the bottom and the shelf (3).
Push four wooden dowels (A) in the drillings at the ends of the back (4).
Nachttafel met twee open vakken
Nachttisch mit zwei offene Fächer
Table de nuit avec trois casiers
Night table with 2 compartments
Quax Quax
First dreams First dreams
® ®
First steps First steps
23