LOFT
Quax
First dreams
First steps
®
Step 3 : Use the slatted bottom P4 and four cylindrical nuts D
Push the cylindrical nuts (D) into the holes below the ends of the bottom (P4). Attention: with the hole in line with
the drilling in the bottom.
Step 4 : Use the parts from step 1 and 3 as well as four conical bolts E
Push the bottom (P4) with its drillings onto the threaded pins of the end sides (P1 and P2). Push the bolts (E)
through the nuts and tighten them in the threaded pins.
24
54F 01 00x
Kinderbed 120x60 cm
Kinderbett 120x60 cm
Lit bébé 120x60 cm
Baby cot 120x60 cm