Basler BIP2-640c Installationsanleitung Seite 22

Installation Guide
(Pin 4, 6, 8 description continued from the previous page.)
Variant 2 (input port connected to an input voltage):
You can also connect an input voltage (0 to 24 VDC) to the I/O port as illustrated
in the schematic drawing (variant 2) on page 24. An input port will be detected by the
camera as active or inactive depending on the applied voltage value and on whether
the port is or is not set to invert.
Input Voltage
0 to +1.15 VDC
+3 to +24 VDC
0 to +1.15 VDC
+3 to +24 VDC
(Pin 4, 6, 8 description continued on the next page.)
Table 1: Terminal Connector Pin Assignments
20
Port Set To Invert
No
No
Yes
Yes
Input Detected As
Active
Inactive
Inactive
Active
Basler IP Fixed Box Cameras