Heitronic ALMERIA Montage- Und Bedienungsanweisung Seite 3

GB Instructions for assembly and use
LED Socket Lamp ALMERIA
Item no. 23883
CAUTION! Essential reading!
Please read these assembly and operation instruction carefully and in their entirety before you turn the lamp on.
Dear customer,
Thank you for buying this quality product. In doing so you have purchased an appliance developed and
constructed with the very latest technology.
The appliance complies with the European and national requirements for electromagnetic compatibility and low-
voltage guidelines.
In order to keep the lamp in this state and to ensure safe operation, it is essential that you, as the user, observe
the instructions in this operating manual! They contain important details about putting it into operation and
handling it. Make sure you draw attention to this when giving this product to someone else. For this reason,
please keep these instructions safe for future reference!
Technical data
Power supply:
Maximum output:
Dimming:
Bulb type:
Proper use

This product is only permitted to be connected to a 230V / 50Hz AC power supply and only using bulbs
as described in the "Technical data" section.

This product is dimmable.

Use is only permitted in enclosed spaces, in other words not outdoors!

The lamp is designed for use using wall sockets for mains power supply.

The lamp is only to be used when there is no risk of moisture, heavy soiling, or excessive warming.

Only use bulbs of the specified type (please refer to "Technical data" section).

Use only original spare parts and bulbs specified by the manufacturer.

No part of the product is permitted to be altered or modified!

Any manner of use other than described above will cause damage to this product. Moreover, this will
also entail such risks as short-circuiting, fire, electric shock, etc.

The safety precautions and the technical data are to be adhered to at all times!
Care and maintenance

Observe the safety precautions and those in the assembly instructions (!).

To clean the whole lamp, only use a soft lint-free cleansing cloth. Under no circumstances are scouring
agents or solvents to be used on any part of the lamp!
Disposal

Dispose of the unusable lamp in accordance with the legal regulations.
Instructions for assembly and use no. 23883
230 V- 50 Hz
2 W
The lamp is dimmable.
LED max. 2 W
page 1/ 2
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
09.2012