Werbung
Getting started
GB
1. Before fi rst use, rinse the inside and
wipe the outside of the kettle with a
damp cloth.
4. Close the lid and make sure it snaps
in correctly. Otherwise the auto
switch off function will not work
reliably. Place the kettle onto the
base. Press down the ON/OFF switch;
the indicator light will illuminate and
the kettle will start to heat up.
ELX13940_Florence_WaterKettle_update_AEG_5lang.indd 13
2. Place the base unit on a fi rm and fl at
surface. Plug the mains plug into a
wall socket. Excess cord can be wound
into the bottom of base unit.
5. Temperature setting*. Depending
on what drink you wish to prepare
(green tea/instant coff ee or black tea),
you can select between hot or boiling
water by turning the knob to the
respective symbol.
*EEWA 5120
3. Press the button to open the lid,
pour water into the kettle. It is also
possible to fi ll the kettle through the
spout, without opening the lid. Make
sure water level is visible in the water
level indicator, but not exceeding the
Max. mark.
6. The automatic switch off function.
When the water has boiled or the
kettle is moved from the base, it will
switch off automatically. If you wish to
stop the heating process before the
water is boiling, simply lift up the ON/
OFF switch to the OFF position.
2010-12-16 13:29:50
D
GR
NL
F
GB
13
Werbung
