LSC Smart Connect Benutzerhandbuch Seite 3

User manual
EN
Caution: disconnect from power before servicing
1. Remove the upper cover
2. Add water: do not fill above the 'max.' line when you add water
to the tank (Max. 300 ml).
3. Add essential oil: add an essential oil to the water tank. 2 - 3
drops at most. (About 0.1〜0.2 ml).
4. Put the upper cover back on. Do not tilt the di user and
ensure that water does not leak as this will interfere with the
mechanism.
5. Connect the cable: plug the cable into the DC socket.
Keep the di user level while connecting the cable.
6. Connect to a power supply.
7. Press the "mist" button:
• 1st press: turn the di user to a high level of mist
• 2nd press: adjust to medium level of mist
• 3rd press: adjust to a low level of mist
• 4th press: turn the di user o
8. Press the "light" button to turn the light on or o .
9. Press the "timer" button to set count down.
• 1st press: 1 hour timer
• 2nd press: 3 hours timer
• 3rd press: 6 hours timer
• 4th press: continuous mode
10. The functions as described in point 7, 8 and 9 can be operated
in the LSC app as well.
Please note:
- The amount of mist depends on the indoor environment and
the volume of water in the tank.
- Due to the water temperature and other external factors, there
may be less mist when you initially turn the unit on. It will
increase after a few minutes.
- If there seems to be no mist, this may be caused by air
temperature, humidity, airflow and so on.
- This unit has an automatic o function. It will be triggered
automatically when the water runs out or gets too low. In those
circumstances, the power will be automatically cut o .
2 Safety Class 2: the adapter is double insulated and does not
need to be connected to an earthed socket.