Herunterladen Diese Seite drucken

Primewire 20190111SZ090 Bedienungsanleitung Seite 6

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Turn off all devices you want to connect and link them to the splitter by using a
suitable HDMI cable. The various HDMI ports of the splitter are explained in the
table below:
Input
Port of the HDMI player
Output 1
Port of the first HDMI display device
Output 2
Port of the second HDMI display device
Now plug the power supply of the HDMI splitter into a properly installed grounded
socket and turn on the devices connected by the HDMI cable. The splitter is now
ready for use.
Note: Please note that the maximum resolution is determined at HDMI output 2. To
do this, connect the device with the lower resolution to output 2.
After disconnecting the power, the splitter takes over the maximum settings of the
HDMI output 2. To ensure correct performance, we recommend to connect the de-
vice with the lower configuration options (resolution) to the HDMI output 2.
Note: Please note that for UHD resolutions a maximum cable length of 5m should
not be exceeded, otherwise the image quality may be affected (HDMI input + HDMI
output = total length).
5. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair or
alteration to the device not carried out by the original supplier, will invalidate the
6
English

Werbung

loading

Diese Anleitung auch für:

303524