Adam Hall S22 Bedienungsanleitung

S22
Microphone stand with round base
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. A level surface is required, otherwise there is a high risk that it could fall over.
7. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
8. Do not modify this equipment.
9. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
10. Plastic bags must be kept out of reach of children.
11. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
pdf/Manufacturers-Declarations-AD_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
https://cdn-shop.adamhall.com/media/
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
INTRODUCTION
The S22 microphone stand is made of steel tubing with a black powder coating finish and features a
heavy-duty diecast iron base with rubber feet to prevent vibration and provide acoustic isolation. Height
adjusts from 90 - 160 cm with a durable twist clutch. The S22 round base mic stand comes with a 3/8" to
5/8" thread adapter and cable clip.
FEATURES
Heavy cast iron base
Steel tubing with black powder coating finish
Twist clutch for 90 - 160 cm height adjustment
Includes 3/8" to 5/8" adapter and cable clip
SPECIFICATIONS
Model number:
Product type:
Type:
Tubing material:
Tubing colour:
Tubing surface:
Min. height:
Max. height:
Base material:
Boom:
Weight:
Additional information:
S22
Stands and Tripods
Microphone Stands
steel
Black
powder coated
840 mm
1570 mm
Cast
no
4,3 kg
round base