Honeywell PEHA D WMK Installationsanweisung Seite 2

GB
PEHA Lichtsteuerung – MLS Digital
D WMK
Installation Instructions
1
Wall Mounting Kit D WMK (supplied assembled)
Discard clamping ring and back box supplied
with D MR detector
3
Offer the detector up to the D WMK
and twist into place
5
Fix the D WMK lid in place using the screws provided
PEHA Lichtsteuerung – PEHA Elektro GmbH & Co. KG a Honeywell Company · Gartenstraße 49 · 58511 Lüdenscheid · Deutschland · www.peha.de · peha@peha.de
2
Mount vertically in corridor applications
4
Tighten the locking screw at the rear of the detector. Rotate
the detector so that it points in approximately the correct
direction, then attach and dress wiring
6
Commission detector as required
Slight adjustments to direction of
view may still be made
Can also be mounted
on the lid of a conduit
stop end box with
20mm cut-out
W4053B_DE_1204 Seite 2/2