Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions Manual
Electronic lock:
Model VT-MT 330/440/660 ME
Thank you!
Congratulations for purchasing this product!
To ensure that the lock functions free of any trouble, we strongly advise you to read the instruction
manual very carefully before using it. Please keep this manual, as it contains valuable information in case
your electronic lock needs to be serviced.
1. Putting the lock into operation:
Before putting the lock into operation, please take the following steps for safety reasons:
• Install the batteries according to item 5 of the instruction manual.
• Program user code according to item 4 of the instruction manual.
• Change the factory master code
2. Opening the lock:
The lock opens if it recognises memorised your secret code. Once programmed your personnel user
code you will use this personal 3 to 6 digit code. Don't wait longer then 5 seconds between each step
when opening the safe, else the lock disconnects. To open the safe, proceed as follows:
• Enter your 3 to 6 digit code n n n n n n.
• Press E.
• The safe is open.
Should you enter a wrong code, you will hear 3 short beeps, the lock won't open and on the display
ERROR appear. After entering a wrong code 3 times, the keyboard will be disabled for 5 minutes.
3. Closing the safe
• Close the door.
• Enter your 3 to 6 digit code n n n n n n.
• Press E.
• The safe is closed.
• Check whether the door is properly locked.
4. Memorising your user code:
You can programme your own user code. Please notice that this manipulation will overwrite the old
code. Do not use codes referring to your person such as date of birth, telephone numbers etc. Keep your
code in a safe place but never inside of your safe. To program a new secret code, proceed as follows:
• Close the door.
• Enter your 3 to 6 digit code n n n n n n.
• Press E.
• Your new user code is programmed.
according to item 6 of the instruction manual.
61401930000008dt+fr+it_BA.doc / 5.7.07 / mf
Werbung
