Eurotops 27927 Gebrauchsanleitung

EP561 / S633B
READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR DEVICE AND RETAIN THEM
FUNCTIONS
The weather station is equipped with 3 function buttons: MODE, UP/DOWN, SNZ/LIGHT
- Press the MODE button to choose between operating modes: time/ calendar or alarm.
- Press the UP/ DOWN button to increase or alter values.
- Press the SNZ/ LIGHT button to activate the automatic snooze function.
USE
- To operate insert two AA/LR6 batteries into the (covered) battery compartment positioned at the
base of the weather station.
- The weather station automatically detects internal temperature.
- Press the DOWN button to select the temperature measurement unit, Celsius (°C) or Fahrenheit
(°F).
- The humidity level is automatically detected and displayed on the weather station screen.
NOTE
Press the MODE button once to change the display mode from "time display" and "alarm
o
display".
Press the SNZ/ LIGHT button to activate the backlight.
o
AUTOMATIC CLOCK AND CALENDAR SETUP
- Having inserted the batteries, press and hold the "DOWN" button for 3 seconds to activate DCF
reception.
- In the instance of poor reception, only the part
near a window until the entirety of the icon flashes,
- Once your radio controlled weather station successfully
signal, the correct time is displayed, correctly adjusted for summer or winter. The weather station
alarm automatically scans the time signal every hour in order to ensure the accurate time
display.
COMMENT
- The weather station alarm automatically switches to DCF mode at midnight every night. If the signal
is not received, the alarm switches to DCF mode at 02:00, 04:00 and 06:00 in the morning. Auto-
reception ceases following 4 failed attempts and reception restarts the following day at midnight.
- The signal can always be received during the night but not during the day. If your weather station
alarm does not manage to pick up the signal during the day, leave it next to a window overnight
where the signal is strong in order to gain the radio signal.
RADIO CONTROLLED WEATHER STATION ALARM
OPERATING INSTRUCTIONS
FOR FUTURE REFERENCE.
INTERNAL TEMPERATURE AND HUMIDITY SETUP
Measurements
Internal temperature
External temperature
Humidity
CLOCK AND CALENDAR SETUP
Display range
0°C to 50°C
-20°C to 60°C
20% to 95%
of the icon flashes. Place the weather station
indicating good signal.
receives the DCF-77
1