Herunterladen Diese Seite drucken

SCHWARZBECK NSLK 8126 Bedienungsanleitung Seite 10

Netznachbildung

Werbung

Außer dem Masseanschluss auf der
Frontplatte der Netznachbildung kommen
für diesen Zweck die Aluminiumwinkel an
der Rückseite der Netznachbildung in
Betracht. Eine Schutzerdung über eine im
Gerät
verbaute
zusätzlich
beim
normgerechte Schukosteckdose über die
rückseitige Netzanschlussleitung.
Die CISPR 16-2-1 (VDE 0877) sieht auch
eine
bestimmte
Anschlussleitung des Prüflings in 40 cm
Abstand vor der Metallwand vor, die
Kabellänge soll 80 cm betragen oder
mäanderförmig verlegt werden. Durch die
Art der Verlegung und die Art des
eventuell
Schutzleiteranschlusses aber auch durch
die Raumkapazität des Prüflings kann der
Störspannungsverlauf
höheren Frequenzen stark beeinflusst
werden.
Datasheet
Distributed by: Reliant EMC LLC, +1 408 916‐5750, info@reliantemc.com, www.reliantemc.com
HF-Drossel
wirkt
Anschluss
an
eine
Verlegung
der
vorhandenen
vor
allem
bei
The LISN can be grounded using the
screw terminal at the front panel as well
as the aluminum brackets at the rear side.
Additionally a protective earth using a RF
choke is functional as soon as the supply
cable of the LISN is connected to a
Schuko socket that is conform to the
standards.
According to CISPR 16-2-1 the connecting
cable of the device under test has to be
laid in a 40 cm distance to the metal wall
and the length of the cable should be
80 cm or being laid meander like. The way
the cable is laid and the type of protective
ground
connection
capacitance of the equipment under test
can influence the disturbance voltage
especially at higher frequencies.
SCHWARZBECK MESS – ELEKTRONIK OHG
An der Klinge 29
69250 Schönau, Germany
Phone: +49 6228 1001
Fax.: +49 6228 1003
E-Mail: office@schwarzbeck.de
www.schwarzbeck.de
10/10
NSLK 8126
but
also
the
Rev. A

Werbung

loading

Diese Anleitung auch für:

Lisn nslk 8126