TerraTec AUDIO RESCUE Kurzanleitung Seite 3

Quick Setup Guide
Product description
The Terratec Audio Rescue digitizes music cassettes and other audio sources
directly into the MP3 format, without need of a PC. Just plug a Micro-SD card
into the card slot (TF) and press the recording button. Then the Audio Rescue
automatically converts the whole content of the music cassette or the CD/
record into the MP3 format. You can directly listen to the recording via the
headphones which come with the delivery.
Operating elements:
5
6
OPEN
1
AUDIO RESCUE
4
3
2
1. Open the lid – Pull down to open the music cassette compartment.
2. AUX connector – The Audio output can also be used as an Audio input for
external sources such as CD player or record players.
3. TF-Slot (Micro-SD)
4. Volume control
5. Inspection window
6. Operating elements
- PLAY – Playback
- STOP – Stop playback
- F.F. – Fast forward
- REW – Reward
- DIR – Change playback direction
- Auto-Reverse switch – Auto-Reverse mode
7. Mains connection (optional power supply unit)
8. Operating elements (conversion)
Start/Stop of the recording
Start/Stop of the playback
Back
"Next title" during playback
Modus Switch during standby.
+/-
Volume setting
LED display:
Standby – continuously illuminated
Recording – flashes rapidly (2 x per second)
Playback – flashes slowly (1 x per second)
Green – Manual mode
Blue – Auto mode
8
7
AUDIO RESCUE
Commissioning:
– You can either use the USB cable included in the delivery or 2 AA batteries
as power supply.
– Please insert a music cassette and connect the headphones or the lou-
dspeaker to the AUX-Port in order to playback.
– Once you insert a Micro-SD card the LED will illuminate in green.
– Press the Play key, in order to playback the music cassette.
– Adjust the volume as desired.
Conversion:
Music cassette recording in the manual mode:
When the music cassette and the Micro-SD card are inserted and the Audio
Rescue is in the Stand-by Modus (LED is illuminated in green), then the Au-
dio Rescue would be ready for the conversion. Start the playback and press
the recording button – the conversion has now started automatically (the
LED flashes green during the recording procedure). The recording can be
stopped again by pressing on the recording button.
In the manual mode the titles are saved in a file. If you would like to save the
individual songs in separate fields, you have to briefly press the key in the
break between the songs. Then the green LED goes off for about 2 seconds
and restarts flashing when the next song is saved in a new file.
If you want the Audio Rescue to take over this function for you, press the key
for 3-5 seconds, in order to change over to the Auto mode. The colour of
the LED changes from green to blue.
Recording in the Automatic mode:
In the Auto mode, the Audio Rescue recognises the break between the
songs and saves each song in a separate file. On the Micro-SD card, a fol-
der (TAPEMP3) is automatically created, where the individual files (FV0001-
FVXXXX) are being saved. In order to change back to the manual mode,
please press the key for 3-5 seconds until the LED is illuminated in green
again.