Werbung
Verfügbare Sprachen
Verfügbare Sprachen
www.VentureHome.se | www.VentureDesign.se
Congratulations on your new outdoor furniture!
It is important to know how to best take care of your furniture. We recommend you go to
www.venturdesign.se and find "Care Advice" to get mor detailed information. On this sheet you will
find general tips and tricks for different materials.
Steel: Keep in mind that steel is a material that can rust when getting exposed to water and
moisture over a longer time. It is important to try and keep the steel furniture dry, by using a
furniture cover for example. Rust from inside or on the furniture can drip and discolour the surface
it is standing on. Remember that if placing it on your new wooden terrace.
Aluminum - Aluminum is a lighter material than steel and makes your furniture light and flexible, this
material should not rust either. However, some parts of your furniture may still be made of steel
(for example screws or fittings)
Artificial Rattan (Wicker): This material is incredibly grateful and requires little care to maintain a
good condition. The material is UV-resistant and can withstand weather and wind. It is important to
remember that wicker is made of plastic and therefore behaves accordingly - expands and shrinks
depending on temperature. Wicker will expand and get loose when it is warm but will then contract
again when it gets colder.
Teak: Our teak furniture is produced from cultivated teak i.e., teak that is grown for the purpose of
becoming furniture or something else. This means it has not contributed to the deforestation of the
tropical rain forests. Of course, it is also FSC-certified. In order to keep the finish and colour of your
teak, it should be treated with teak oil. If this is not done, the teak gets the characteristic grey colour
that can almost be compared to driftwood. We always recommend to treat teak, as dry wood can
lead to smaller cracks. OBS! Keep in mind that it is important that the material is dry and clean
before oil treatment.
Aintwood: This material looks like wood but is made of plastic to better fit for our Scandinavian
climate. Plastic is sensitive to higher temperatures. Therefore, furniture in aintwood should not be
placed in an unventilated, glazed area where the temperature can rise to warmer degrees. This can
make the material soft and deformed. Places to avoid in the summer are greenhouses and glazed
porches. It is important to remember that sunlight reflected in glass creates a burning effect.
Therefore, never leave any glass objects unattended on the aintwood surface, as burn holes can be
created. To avoid this, always use coasters and remove glasses when not used.
Polyester: This material is used for almost all our cushions and umbrellas and should not be machine
washed. We recommend hand washing instead. As polyester can be bleached in direct sunlight, we
recommend always storing the cushions / umbrellas in e.g. cushion boxes or under furniture covers
when not used. This is to extend the durability and avoid discoloration.
We hope you have many wonderful summer moments in your new furniture!
OBS!
Please be careful when assembling, if screws are tightened too hard (or by screwdriver), damages in
the table top may appear. Tighten the screws after some time of using the
@Venturehomese
@Venture.Design
product.
Werbung
