Vamvo MLP-110 Benutzerhandbuch Seite 4

Notice
How to use the projector correctly:
Do not look directly into the lens, the light will hurt your eyes when the projector
•
is on.
Do not block the air outlet as to avoid damaging the internal electronic device
•
when the projector can't cool itself.
Do not use chemicals, cleaners, or water to clean the projector. Also avoid rain,
•
moisture, and leucocratic liquid in order for the circuit board not to corrode.
Please put the projector and its accessories on some place children can't reach.
•
Please make sure the projector working environment is dry and well-ventilated.
•
Do not place the projector in too warm or too cold rooms as low or high
•
temperatures will shorten the lifespan of the device. Ideal working environment
for this device is between 5°C to 35°C.
Do not subject the projector to equipment that emits heat (e.g., drying machine,
•
microwave oven) in order to make it dry.
Do not press hard or put something heavy on the projector as it will damage the
•
device.
Do not throw, beat, shake the projector as it will damage the circuit board.
•
Do not disassemble the projector. Please contact the after-sales service if you
•
encounter any problem.
Do not fix the projector yourself. If your projector doesn't work normally, please
•
consult with after-sales service.
4