Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
1
Introduction
1.1 Product description
Storage unit with shelves.
1.2 Intended use
For storage of light objects such as garden tools and
equipments. The product can be used indoor.
1.3 Symbols
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
Discarded product must be recycled
according to current regulations.
1.4 Product overview
Figure 1
1.
Shelf foot
2.
Shelf top cap
3.
Shelf pillar
4.
Connect rings (used for connecting 2 or more shelves)
5.
Wall mounting clamp
6.
Shelf
2
Safety
2.1 Safety definitions
Warning! If you do not obey these instructions, there
is a risk of death or injury.
Caution! If you do not obey these instructions, there
is a risk of damage to the product, other materials or the
adjacent area.
Note! Information that is necessary in a given situation.
2.2 General safety instruction
Warning! If you do not obey these instructions, there
is a risk of death or injury.
● Read the warning instructions that follow before you use
the product.
● The product must be assembled by an adult, the product
contains small parts.
8
● Assemble the product on a level and stable surface.
● For safety and stability, secure the shelf to the wall using
the wall mounting clamps.
● Do not exceed the maximum loading capacity of the
shelf.
● Place heavy and/or bulky objects on the bottom shelves.
Spread the load equally on the shelf.
● Make sure that the product is standing stable.
● Do not allow children to climb on the product.
3
Assembly
3.2 To assemble the shelf
1
Make sure that all parts are included.
2
Take one shelf , assemble the feet at the bottom
according to the illustration (figure 2).
3
Assemble the pillars on top of the first shelf, make
sure that the pillars are properly mounted.
4
Take the next shelf and mount the pillars underneath,
repeat the process until the last shelf is assembled.
5
Assemble the top caps on the last shelf.
6
Secure the product to the wall and attach the wall
mounting clamps on the upper pillars, screw the
clamps to the wall.
7
Connect rings are used to joint 2 or more products
(figure 3).
4
Technical data
Technical data
Depth
Width
Height
Shelf
Load capacity on each shelf
Material
Net Weight
38 cm
71 cm
170 cm
5
30 kg
PP (Polypropylene, Plastic)
4.2 kg
2023_001
Werbung
