Avacom FAMILY HUB Bedienungsanleitung Seite 3

AVACOM FAMILY HUB
EN
Operating manual
Thank you for buying AVACOM FAMILY HUB 4-port charging USB hub. Before using the
charger please read the operating manual.
PACKAGE CONTENT
Charger
Networking cable
Operating manual
BASIC INFORMATION
With AVACOM FAMILY HUB charger you can charge up to 4 different devices via 4 USB
outputs. The charger provides enough power to charge all demanding devices including
smartphones, tablets or navigations. USB connector marked QC also enables quick
charging compatible with Quick Charge technology. This way of charging can be used for
devices supporting this technology. To charge the device by Quick Charge technology,
use a networking cable. The connected device will charge up significantly faster.
USE
Connect a networking cable included in the package to the charger and then plug it in the
socket. Plug a USB cable suitable for charging your device in the USB output. AVACOM
FAMILY HUB charger is suitable for Apple devices (iPad/iPhone/iPod), and also for
smartphones with Android, Windows Phone and other operating systems, for tablets,
Power Banks, cameras, navigations etc.
SAFETY INSTRUCTIONS
Before using the charger please read the operating manual. If the charger is damaged
due to non-compliance with the operating manual the buyer is not entitled to warranty. The
seller is not responsible for any subsequent damage to property or injuries caused by the
misapplication of the charger or by not following the safety instructions. It is forbidden to
dismantle the charger or modify or adjust its properties. The charger can be used only with
the original networking cable included in the package. It can be used only inside. Do not
allow children to manipulate the charger and keep it away from them. If the charger seems
damaged, it is overheating or does not work properly stop using it and contact your seller.
Do not expose the charger to temperatures below 0 °C and above 40 °C and to relative air
humidity of more than 80 %. Keep the charger in a dry place.
RECYCLING
Once the charger is at the end of its life take it to a waste collection point for recycling. You
can find the recycling symbols on the product and its package.
TECHNICAL SPECIFICATION
Input: AC 100-240V 50/60Hz 1A
Output: 4x USB
5V/6.5A Max or 5V/4A + QC 3.0 (3.6-6V/3A or 9V/2A or 9-12V/1.5A)
Made in China for AVACOM s.r.o.