Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Setting the time and date
To adjust the date pull the crown out to the first click. Then turn the crown counter-
clockwise until the preview day's date* appears. After this pull out the crown to the second
click** when the second hand is at position 12:00. It will stop on the spot. Then set the
hands to the desired time of the day (make sure AM/PM is set correctly) by turning the
crown.
After setting the correct time, push the crown back in the normal position.
*Don't set the date between 21:00 and 01:00 (the date may not change the next day). If it is
necessary to set the date during that time period, firstly change the time to any time outside, set the
date and then reset to the correct time.
**When the crown is at the second click position, do not press any button. Otherwise the chronograph
hands will move.
Stopwatch
This model has an integrated stopwatch which can be started and stopped with button A
and reset with button B.
With the tachymeter function you can estimate the speed if the distance is known.
You can set the second hand of the stopwatch by pulling the crown out twice until the watch
stops completely. Now you can adjust the hand with the button A.
Accuracy/Month
Genauigkeit/Monat
1
Hour | Stunde
2
Minute | Minute
3
Stopwatch seconds | Stoppuhr Sekunden
4
Stopwatch minutes | Stoppuhr Minuten
5
24-hour hand | 24-Stundenzeiger
6
Date | Datum
7
1st click | 1. Position
8
2nd click | 2. Position
9
1st click | 1. Position
A
Button A | Taste A | stop | Start
B
Button B | Taste B | reset | Zurücksetzen
± 20 sec.
Battery life
± 20 Sek.
Batterie Lebensdauer
Varsity
42 mm
5 Years
5 Jahre
Werbung
