Filter Change - Create AIR PURE ROOM Bedienungsanleitung

• SPEED: The machine is working in middle speed as default after start working. By pressing
SPEED, it changes to high speed and the speed indicator light is lit in high intensity. Press
again and it will change to low speed, speed indicator light is lit in low intensity. Press for a
third time and it changes to middle speed with white indicator light in low intensity.
• POWER: When the plug is connected, the power indicator light is lit. The ambient light is also
lit and then turns off. It means the machine is in standby mode. Touch power, the ambient
light is lit and the machine starts working in middle speed, speed indicator light is lit. Press
power again and the machine will power off.
• NEGATIVE ION: Press the negative ion button to start the function, the indicator light will
be lit. Press the button again to stop the function.
• NIGHT MODE: Long press the NEGATIVE ION button for 2 or 3 seconds until the ambient
light turns off. Only the red light of the ON/OFF button will be on. The purifier will still be
working while the night mode is on. Press any button to activate the light and display again.
When the machine accumulates 3000 hours working, the atmosphere light will start
flashing slowly to remind the user to replace the filter. After replacing the filter, re-plug
the power cord and let the machine in standby mode, touch the speed button for 3 times
continuously and then long press for 2 seconds. The atmosphere light will turn on white
after 5 seconds quick flashing. It means the filter has been changed successfully. Power
on the machine and it will work normally.
HOW TO REPLACE THE FILTER
1. Turn off and unplug the machine.
2. Flip over the machine to reveal the filter cover. Turn the filter cover counterclockwise to
unlock position and remove the cover.
3. Remove the old filter.
4. Remove the new filter from its polybag and place it into the machine with the pull tabs
facing the opening.
5. Replace the filter cover onto the housing, make sure the arrows on the housing and filter
cover align. Turn the filter cover clockwise to the lock positon.
E NGL I SH
8

FILTER CHANGE