Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
2-in-1 hot wire styrofoam cutting kit, 20 W
Item no. 2227891
Intended use
The product is intended to be used for hot cutting polystyrene. Vapours that are produced
during material processing in enclosed rooms must be removed with an extraction system.
Heating temperatures can reach a maximum of approx. 450 °C. PVC and PVC-coated materi-
als must not be processed due to the hazardous vapours released during cutting.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit, fire or electric shock. Read the operating instruc-
tions carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and pro-
duct names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Hot-wire cutter
• Power adapter
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may cause a fatal electric shock!
This symbol indicates that this product is built according to protection class II. It is
equipped with reinforced or dual insulation between the mains circuit and the output
voltage.
This product has been CE tested and therefore complies with the necessary national
and European regulations.
This symbol reminds you to read the operating instructions included with the pro-
duct.
Safety information
Read the operating instructions and safety information carefully. If you do not
follow the safety instructions and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/guaran-
tee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dange-
rous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
All manuals and user guides at all-guides.com
• Spare wire ø 0.3 mm,10 m
• Operating instructions
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• The power adapter is built according to protection class II. Only connect the ad-
apter plug to a standard mains socket (230 V/AC, 50 Hz) connected to the public
grid.
• Only power the product using the power adapter provided. Before plugging in the
power adapter, check whether the voltage stated on the power adapter complies
with the voltage of your electricity supplier.
• The mains outlet must be located near to the device and be easily accessible.
• Never pour liquids over electrical devices or place objects filled with liquid next
to the device. If liquid or a foreign object enters the interior of the device never-
theless, first power down the respective mains socket (e.g. switch off the circuit
breaker) and then pull the mains plug from the mains socket. Discontinue use and
take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. This may cause condensation to form, which can destroy the product.
The power adapter may also cause a fatal electric shock! Allow the product to
reach room temperature before connecting it and putting it into use. This may
take several hours.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Switch off the mains voltage to the socket containing
the power adapter (switch off the corresponding circuit breaker or remove the sa-
fety fuse, and then switch off the corresponding RCD protective switch). You can
then unplug the power adapter from the mains socket. Dispose of the faulty power
adapter in an environmentally friendly manner and discontinue its use. Replace it
with a power adapter of the same design.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
• For safety reasons, disconnect the power adapter from the mains socket during
storms.
• Unplug the mains plug from the mains socket if you do not plan to use the product
for an extended period of time.
• When setting up the product, ensure that the cables are not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
c) Persons and product
• This appliance may be used by children over 8 years of age and people with redu-
ced physical, sensory or mental capabilities if they have been given supervision or
instruction concerning the safe use of the appliance and understand the hazards
involved. Children must not clean or service the appliance without appropriate
supervision. Children should be supervised to ensure that they do not play with
the device.
• The product is only designed for household use, not industrial use.
• Observe the safety information provided by the manufacturer for working with the
material.
• Never operate the product in the vicinity of combustible materials (e.g. curtains).
• Keep the workplace tidy. Do not leave any flammable materials lying around when
you are using the device.
• Only use the hot wire included with the product, otherwise the power adapter may
be damaged.
• Never touch the hot wire when it has heated up. This poses a risk of injury.
• Switch the product off when you are not using it. Not doing so could cause an
accident.
• Allow the product to cool completely before storing it.
• Remove the hot-wire holder when you are not using the device.
• Never leave the product unattended.
• Store it in a well-ventilated place. Wear a safety mask during operation, if neces-
sary.
• Do not operate the product in the vicinity of flammable solvents or gases or in en-
closed spaces where solvent vapours can easily accumulate. The hot-wire cutter
can become hot enough to ignite the gases.
• Do not use the product in environments with a high dust load or flammable ma-
terials, e.g. paper.
• Only use the product to cut polystyrene. Toxic fumes may occur if you use the
device to cut other materials, e.g. PVC.
Werbung
