TaoTronics TT-SK09 Schnellstartanleitung Seite 5

LED Indicators
LED Indicator
Flashes blue rapidly
Flashes blue once
every 5 seconds
Flashes red slowly
Solid red
Red off
▲Note:
• The unit will not automatically connect to a Bluetooth
device when switched on; please read the next section on
how to connect to your Bluetooth device.
• The unit will power off automatically if no connection is
made within 10 minutes.
How to Use
Charging
1) Connect the charging port with any USB charging
adapter or active computer USB port.
2) Charging will start automatically with LED indicator
turning red.
3) The speaker is fully charged when LED indicator turns off.
Status
Disconnected with
Bluetooth device
Paired / playing music /
on phone call
Low battery
Charging
Fully charged
Pairing
1. Turn on the speaker by pressing and holding the Power
button for 2 seconds.
2. Once the speaker is on, it will go into pairing mode
automatically, the blue indicator will ash rapidly.
3. Activate the Bluetooth function on your device and
search for nearby Bluetooth connections.
For iPhone: Settings > General > Bluetooth > On
For Android: Settings > Bluetooth > On > Scan for devices
4. Select "TaoTronics TT-SK09" from the search results,
and tap to connect.
5. The LED indicator will be solid blue and a beep sound will
be triggered to indicate a successful connection.
Note:
• Please make sure no other open Bluetooth device is within
range, and the speaker is within 3 feet of your device.
• The speaker will attempt to pair with the last paired device
when powered on. If you have previously paired the
speaker with a device, simply turn on your device and the
speaker (by pressing the Power button for 2 seconds to
turn on), they will pair automatically without going
into pairing mode.
• If a PIN code is required for pairing, please try "0000" or
"8888" (4 zeroes or 4 eights).
05/06