SIXTOL SX4013 Gebrauchsanweisung Seite 4

EN
Use
1. Remove the diffuser cover by lifting it up
2. Connect the power adapter connector in the midddle of the
diffuser
3. Make sure the power cord is unplugged from the USB
port
4. Pour water up to the maximum level line into the
container
5. You can drip a few drops of essential oil into the water,
about 2-3 drops per 100 ml
6. Replace the diffuser cover
7. Plug in the socket
8. Touch the start button once to start the diffuser.
The second touch retains the current light color.
The third touch turns off the light.
The fourth touch or long press of the start button switches off
the diffuser.
Note
During operation, the amount and intensity of the mist
discharged can be changed for some types of diffusers
If there is not enough water in the tank, the appliance
switches off automatically
After use, disconnect the appliance from the power supply
and pour out the remaining water from the tank and dry it
3