Richard Lampert STOCKHOLM Montageanleitung Seite 4

1.
Insert the dowels
Caution! Only use the outer drill holes.
2. Start at one corner with the threaded screws
the headboard and footboard together.
Tip! First turn the two screws with the ball head of the Allen key and then tighten
fi rmly with the short, straight end.
3. Repeat this step 3 times.
4. Determine the height of the bed slats and then attach the 4 supporting battens
at the appropriate points on the bed side-pieces with the connecting screws
5. Insert the plastic foot into the central cross-member for support.
6. Mount the central cross-member in the same plane as the supporting battens
with the enclosed Euro screws
Caution! Note the double drilling pattern for the frame and the cross-member for
the two different heights.
7.
Set the plastic supporting foot of the central cross-member to the appropriate height
for the supporting battens.
8. Optional:
Lay the bed slats and secure them with the 6 wood screws
and the central cross-member.
Slide the bed boxes under the bed and screw the fascias onto the drawers.
Fragen? Questions left?
+49 (0)711 860 20 70 | mail@richard-lampert.de
into the head ends of the bed side-pieces.
and the brackets on the headboard and footboard.
www.richard-lampert.de
and join the bed side-pieces and
into the support battens
.