Seite 12
Box 2/2 EN_If you meet some difficult during the assembly, please loosen the relevant screws for adjustment first, and then tighten the screws again. FR_Si vous rencontrez des difficultés lors du montage, veuillez d'abord desserrer les vis correspondantes pour les ajustements, puis les resserrer. ES_Si encuentra alguna dificultad durante el montaje, primero afloje los tornillos correspondientes para ajustar, y luego vuelva a apretarlos.
Seite 32
EN_ADVICE It is not necessary but we would advise:For additional strength, you can also use some glue or tapes between the polycarbonate panel and the aluminium frame to enhance the stability. Note: Silicone sealant and glue gun are not included in our tool kit.You can buy them locally.Only use silicone sealant suitable for aluminium FR_CONSEILS Ce n'est pas nécessaire mais nous vous conseillons:...
Seite 33
EN_It is not necessary but we would advise: For additional strength, especially in the area with the strong wind weather, you can also drill the screws between the polycarbonate and the aluminum frame to enhance the stability. FR_Ce n'est pas nécessaire mais nous vous conseillons: Pour plus de solidité, en particulier dans les zones où...