Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting of the adapter
Step 1
Grease thread and sealing cham-
fer of the sensor and of the
adapter with the greasing paste
supplied.
The greasing paste is food-grade
(USDA-H1 84-201).
Make sure that the O-ring (D) is
correctly positioned.
Step 2
Screw the sensor into the
adapter. Avoid mechanical influ-
ence on the sealing chamfers.
Step 3
Clamp sensor and adapter into a
clamping device (E). The sealing
chamfers (F) must not be dam-
aged. Tighten the sensor with a
spanner until you can feel the
end stop.
Note: If you continue to turn,
this can have adverse effect on
the sealing.
D
36
E
F
21
Werbung
