Bluetti AC60 Bedienungsanleitung Seite 12

4. Operation
4.1 Buttons
BLUETTI AC60 has PWR button, AC power button and DC power button.
4.1.1. Power ON/OFF
•
Press the PWR button to start the AC60. When AC60 is on, press this button to turn
on/off the LCD screen. Press and hold the button for more than 2 seconds to turn off
the AC60.
•
Press the DC power button to turn on/off the DC output (cigarette lighter, USB, wireless
charging).
•
Press the AC power button to turn on/off the AC output.
4.1.2.Settings
•
Setting mode: When the screen is on and the AC output is off, press and hold the AC
and DC power buttons for about 2 seconds to enter Setting mode.
•
Frequency switching: The current output frequency (50Hz/60Hz) is displayed in the
lower right corner of screen. Under Setting mode, press the AC power button to switch
the frequency.
•
Power Lifting mode:: The Power Lifting mode is disabled by default. To enable it, press
and hold the AC power button for about 2s in Setting Mode, or turn it on directly in the
BLUETTI app. When enabled, the icon
AC60 can run high drain pure resistive loads* (≤1200W) while its rated output power
remains 600W.
Note: The Power Lifting mode is not available when charging AC60 via an AC source like
a wall outlet or generator. The AC source will bypass the inverter and supply power
directly to connected AC loads.
* Any other devices consisting of heating elements only.
12
JUST POWER ON
is displayed on the screen.In this mode, the