Werbung
Instructions for use
The easiest way to fold down the top basket is
to release the adjustment handles one after
the other, whereby with the release of the
second handle you can tilt the top into the
desired position and lock it again.
Assembly of the beach chair and adjustment
of the back rest with 2 people.
Our deVries Exclusiv-Models can be equipped
additionally with a return spring which makes it
easier to fold down the top basket. Please ask
your specialist dealer for assistance.
Materials and care
Synthetic wickerwork
The PE wickerwork used for our beach chairs
is weather- and UV-resistant, fully recyclable
and particularly easy to care. Clean only with
water, sponge and mild soap.
Please do not use cleaning agents
containing tensides.
Use of a special plastic cleaner is
recommended in case of heavier soiling.
Wooden parts
In order to protect against the effects of
weather, the wooden parts of our beach chairs
are impregnated with a commercially available
wood protection glaze. Renew the latter if
necessary depending on the degree of wear
and seek advice from the specialist dealer
when purchasing the glaze.
The beach chairs with a teak carcase do not
need treatment, since teakwood is highly
weather-resistant owing to its high natural oil
content. The teakwood exposed to weather
acquires a silver-grey patina over time; this
can be avoided from the outset by using
teakoil at an early stage. (Please only apply to
clean and dry wood.)
The beach chair should always be
protected against extreme weather
using a deVries protective hood.
TRENDY PURE Greenline 135
dekoVries GmbH • Schultze-Fimmen-Str. 2 • D-26689 Apen • www.deVries-Group.de
TRENDY PURE Greenline 135 XL | Hergestellt für /
© dekoVries GmbH · Schultze-Fimmen-Str. 2 · 26689 Apen · Germany · www.deVries-Group.de
STRANDKORBPFLEGE
BEACH CHAIR CARE
Please make sure the beach chair is stored dry
and ventilated in case not used for a longer
period (e.g. winter). In addition a terry towel
might be placed between the hood and the roof
of the beach chair – this reduces condensation
water and avoids mould spots.
Place four sturdy stones under the corners of
the beach chair in order to avoid water
penetrating the wood from below.
Fixed upholstery and cushion equipment
The fixed seat and back upholstery is
manufactured from dimensionally stable foam
with awning materials. These materials are
predominantly impregnated and receive
water-repellent treatment.
However, over the course of time, the
impregnation wears off but can be restored
again using an impregnation spray. Minor stains
can be removed using a brush and mild soap
solution or a special awning cleaner. Stubborn
stains (grease, fat etc.) are best removed with
common commercially available special stain
removers.
The removable cushion equipment and foot
upholstery are equipped with a zip and are
washable.
The cushion equipment should be removed
over winter time. Using cedar wood chips helps
protecting your beach chair from bugs -
effective and environment-friendly.
Produced for:
As far as weather conditions allows the
hood should be removed from time
to time and the beach chair should be
ventilated.
Following an intensive cleaning the
impregnation should always be
renewed.
Please observe the indications on the
sewn-in textile label in case of
cleaning.
The beach chairs are not
waterproofed. For rain protection
please use a matching cover or take
out all the cushions. In order to avoid
fungus please make sure to ventilate
the beach chair from time to time.
Seite 5 / 16
Seite 5/16
Werbung
