Fenton 100.307 Bedienungsanleitung Seite 9

REAR PANEL / ACHTER PANEEL / RÜCK SEITE / PANEL TRASERO
/ PANNEAU ARRIÈRE / TYLNY PANEL
1. Power ON/OF Switch
2. Frequency control 50Hz-150Hz
3. Volume control
4. Phase switch 0°-180°
5. Auto
6. Subwoofer Line in (RCA)
7. Subwoofer Line out (RCA)
8. Speaker High Level In
9. Speaker High Level out
NOTE. Prior to connecting the subwoofer to an amplifier or any other equipment, make sure that your subwoofer is NOT
connected to the mains and NOT switched on.
Connect the input (6) (L+R) to your amplifier via RCA leads. You also have the option to connect the output (7) (L+R) of your
subwoofer to another active subwoofer or active speaker via RCA leads. Once all connections have been done, you can
connect the subwoofer to the mains and into a mains outlet. Press the On/Off button (1). The power LED lights up.
Set the volume with the Volume control (3) and the crossover frequency with the Frequency control (2).
9